Thinkdiag2 and Kingbolen Ediag Plus Comparison

Is there any difference between Kingbolen Ediag plus and thinkdiag 2 OBDII Bluetooth adapter?

1. Characteristics

Ediag plus / Thinkdiag 2
Scanners for diagnostics of electronic systems of cars of different brands.
Ediag plus is produced under the brand Kingbolen.
Thinkdiag 2 is produced under the brand Thinkcar.
Scanners have the same filling. Inside ediag plus there are boards with Thinkcar marking.
The original Ediag / ThinkDiag program is designed to read and reset errors in all electronic systems, output data flow in digital and graphic form with the ability to record them.
It is possible to perform service functions, adaptations, ECU coding, and actuator tests:

– oil service reset
– injector code entry
– brake bleeding with ABS pump
– particulate filter regeneration
– throttle valve adaptation
– electric parking brake extension
– TPMS sensor code entry
– SAS calibration
– battery calibration
– immobilizer training
– gearbox adaptation
– AFS adaptation
– suspension adaptation
– EGR adaptation
– sunroof training

Supports protocols:
ISO 14230-4(KWP2000)
IOS 15765-4(CAN)
ISO 9141-2(IOS)
ISO14229(UDS)
SAEJ 1850(VPW & PWM)
CAN-FD

The program supports 150+ car brands, device owners will receive free updates for 1 year from the date of device activation.

The devices are an analogue of Launch DBSCar VII.
System: Android and IOS
Bluetooth: 5.1 dual mode Bluetooth
Diagnostic interface: DB15 Working
voltage: 9-18V
Working temperature: -10℃~50℃
Storage environment: ﹣20-60℃
Overall size: 120.5mm*65mm*29mm
Shell material: ABS+PC+TPU rubber edging
OBD cable length: 0.65 meters

2. Appearance

They look the same. Both have a main cable, quick guide and user manual. Both serial number starts with 98843.

3. Software

Original program for Ediag plus
https://play.google.co…id=com.kingbolen.ediag

For Thinkdiag 2
https://play.google.co…=com.us.thinkdiag.plus

The programs are identical in functionality and vehicle coverage.
The ediag plus scanner can be activated in the thinkdiag+ program and will work in both programs.

Service function list:

4. Technical parameter

The devices are based on the Atmel ATSAME70Q20CN processor.
The processor operates at 300 MHz and has 1024 kb of flash memory.

Disassemble both devices and check the board inside.

5. Price

Kingbolen EdiagPlus is cheaper than Thinkdiag2.

Ediag Plus= 119USD

Thinkdiag 2= 149USD

6. Firmware reflash

You can reflash both firmware to use with X-Diag, pro5, ProDiag software Apps.

See

How to Flash Thinkdiag2 Boot Files for ProDiag/Pro5/Xdiag?

Comments

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming. Obdii365 shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for PAD VII ) If you have Smartbox 3.0 (old PAD V and X431 Pro5 ), download J2534 passthru in the previous post . How to Download Launch X431 SmartLink C J2534 passthru driver? Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update). 1. Download PC tool for update (update smartlink c firmware) Visit https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find Download Download Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Download setup driver (J2534 passthru driver) Free download S

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations? Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of Launch X-PROG3 (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series X-431 V , X-431 V+ , X431 Pro5 , X431 ProS , X431 Pro3s+ , X-431 PAD V , X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software. What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software. Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearbox clone. Diagzone: Yes Diagzone does not provide usb conne

How to Make Porsche Coding Changes with Launch CRP919X CRP919E

Instructions on Make Porsche Coding Changes using a Launch CRP919X , CRP919E , CRP919X BT , CRP919E BT scanners. Plugin X431 into OBD 2 Port, Turn Key to Accessory Mode and Wait until VIN is Determined then Hit the Back Arrow in the Upper Left Until You Get to the Next Screen Shown Below Then select Diagnose (Although you may want to update the unit if updates are available) Then Scroll Down and select Porsche Then Select OK Then Select Automatically Search The Unit should determine the type of 718 you have and then Select OK Then Select System Selection Then Select the appropriate System for the Code you want to adjust (Note: This is the system listed in the instructions below such as Front-end Electronics, Rear-End Electronics, Instrument Cluster or Air Conditioning) Then select Code/Brush Hiding Then select Brush Hidden/Modified Then find the Code you want to adjust (These are the Codes in the instructions below) Then Make the Change Then Hit the Write Code Button

Original Launch X-431 OBDII Diagnostic Scan Tools

Search This Blog