Original Launch X-431 OBDII Diagnostic Scan Tools

Many tools can clone Mercedes Benz SIM271DE 2.0 ECU on bench. Here we will show how to clone Benz SIM271DE 2.0 with   Launch X431 IMMO Plus along with the X-prog3   programmer.   The ECM was replaced because it had burnt drivers for the coils. Something that is very common on these this particular computer style. This is the original Continental SIM271DE 2.0 and the left is our used replacement that got from a junkyard. We are going to use the   Launch X431 IMMO Plus   along with the X-prog3. This unit comes with the IMMO Plus whenever you buy the full package. We are going to start by selecting IMMO Prog. It gives us a little diagram of how to connect the x-prog3. Once we get into the menu, we’re going to select engine, scroll down and find SIM271DE. Click on view wiring diagram. Now we have two different options of how we can do this with or without the MCU3 adapter. In this case, we don’t need the MCU3 adapter. Here’s the wiring diagram. It shows us exactly w...

This is a 6T50 transmission control module out of a 2014 Chevrolet Camaro. The shop just replaced the transmission with the used one. The only way to make them work is to clone them. We will show how to clone this transmission control module using the  Launch X431 IMMO Plus . The same procedure goes to GM 6L45/ 6L50/ 6L80/ 6L90/ 6T30/ 6T35/ 6T4/ 6T45/ 6T70 etc TCUs. Got the VCI hardware connected USB to the tablet. Connect x-prog3 and attach to the x-prog3 is this mcu3 adapter. The  mcu3 adapter  does not come with the kit. This one you do have to buy it separately. This is required to purchase this.  Not all modules require this mcu3 adapter but if you want to do any Global A modules, you are going to have to pick one of these up.   We’ve got the leads connected to the connector on the back of the transmission. Got power supply supplying power to the MCU3 unit and the lead from the VCI. We’ve got everything connected. We are going to start by hitting IMMO Prog....