Skip to main content

Launch X431 V+ Porsche 718 Coding Review

I'm pretty pleased with the Launch X431 V+ diagnostic scanner so far. Works great as a code reader (it knows I've pulled the fuse from the sound generator), and should do all the maintenance resets and other normal DIY stuff easily.

Launch X431 V+ Porsche 718 Coding Review

And the coding function appears to be fairly complete and robust. Here's the list so far:

  • A-S/S button saves last state
  • Gauge backlighting always on (white face hack)
  • Disabled seatbelt warnings
  • Remapped coolant temp gauge accuracy
  • Comfort blinkers to 4
  • Windows up/down with key fob
  • Change side markers to indicators only*
  • Activated teardrop wiper (not tested yet, don't want to spray all over the car).
  • Change/disable the auto-headlight washing after 10 washer uses
I've failed (so far) on a couple things, which means I either haven't found the true spot to change, or haven't found some other required spot (some changes need to be made in multiple locations).
  • Change spoiler deploy speed
  • Change Auto headlight sensitivity
  • Change side markers to indicators only*
*Note - I thought I'd failed on this one, but it appears to have working now, the front corner lights are now ONLY indicators, they do not illuminate with the parking or main lights. Not 100% sure what change that I made did that, so I hope I continue to like it that way as I didn't make notes of any of the settings that didn't seem to work...

Still to come:
  • Enable NAV display in MFI (need LVDS cable)
Other things I'm thinking of that I'm not yet sure if they can be done:
  • Auto parking brake engage
  • Re-map tail light function to EU/RoW config
  • Enable PDK Coasting mode while A-S/S is off
  • Don't unlock all doors when opening trunk/rear lid via fob or proximity sensors

 About the instrument lighting:

I first did the normal "white gauge face hack" to turn on the gauge backlighting. But I found a different way, too. There is a setting to add the tail lights to the DRLs. This is sometimes known as "Scandinavian DRLs" as those countries require the tail lights to be on all the time as well as the DRLs. I did this DRL change to my Audi, as it can be gray and foggy around here in winter and having the tail lights on then is desirable. So I found and tried it on the 718 this afternoon. Works fine, adds the tail lights, front side markers, parking lights, and the gauges w/needles!

This may not be for everyone, but if you don't mind having the tail lights on in the daytime, it totally takes care of the gauge illumination issue.

Front-End Electronics > Exterior lighting > DRL with marker light = Yes

Something I noticed to research further - There are some spoiler params that appear to indicate possible visual spoiler notification, either in MFI or console button light. First attempt did nothing, but I'm going to give that some more research later.

Anyway, so far, so good. Even if I don't get any of the other stuff to work, what I've done so far is great.

Comments

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Download setup driver (J2534 passthru driver) Free download S

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearbox clone. Diagzone: Yes Diagzone does not provide usb conne

How to Make Porsche Coding Changes with Launch CRP919X CRP919E

 Instructions on Make Porsche Coding Changes using a Launch CRP919X , CRP919E , CRP919X BT , CRP919E BT scanners. Plugin X431 into OBD 2 Port, Turn Key to Accessory Mode and Wait until VIN is Determined then Hit the Back Arrow in the Upper Left Until You Get to the Next Screen Shown Below  Then select Diagnose (Although you may want to update the unit if updates are available) Then Scroll Down and select Porsche Then Select OK Then Select Automatically Search The Unit should determine the type of 718 you have and then Select OK Then Select System Selection Then Select the appropriate System for the Code you want to adjust (Note: This is the system listed in the instructions below such as Front-end Electronics, Rear-End Electronics, Instrument Cluster or Air Conditioning) Then select Code/Brush Hiding Then select Brush Hidden/Modified Then find the Code you want to adjust (These are the Codes in the instructions below) Then Make the Change Then Hit the Write Code Button