Skip to main content

Launch X-prog3 Adds VAG MQB49 5C 5D Key Programming

Launch X-prog3 immo programmer released new immobilizer software in November 2026.

Add the following functions:

Vehicle ModelFunctionSoftware Version
FIATBody Computer MB91F526/MC9S12XEG384 Chip Read/Writev10.65
Volkswagen (VW)VW and Audi MQB Platform 5C/5D Key Programming Function
D70F3624 VW MQB Steering Column Lock Disassembly, Reading and Decryption of Anti-theft Data Function
DQ400E Gearbox FLASH & EEPROM Data Decryption Function		v10.26
VW/Audi
Porsche		Simos18.1 Engine ECU IMMO Data Decryption Functionv10.26
Mercedes-Benz• Added Mercedes-Benz 4th Gen Anti-theft Key Disable Function
• Added W463 (CAN) Key All Keys Lost (AKL) Password Calculation and Matching Function
• Added Key Frequency Detection Function
• Added 3rd Gen Gearbox Reading and Erasing Function
• Added W230K Lock Ignition Key Add, All Keys Lost, Read Password Function (CHIP method)
• Added 215K/220K All Keys Lost, Read Password Function (CHIP method)
• Added CHIP method for reading lock and matching key method		v10.80
Land RoverAdded Discovery 3 (2004-2009),
Range Rover (2006-2009),
Range Rover Sport (2005-2009)
Mechanical Key Disassembly Read MCU File Write Start Function		v10.55
Anti-theft
Programmer		• Added VW 5D 5C Wireless Generation Dealer Key Function
• Added 4DF/4GF/4GV and 4SF Magneti Marelli Engine BOOT Mode Engine Read/Write Function
• Added 4AF/6JF/6J0/7GF/8F3/9GV/10GF Magneti Marelli Engine BENCH Mode Read/Write Function
• Simos18.1 Engine ECU boot mode read/write clone		v12.30

Launch X-prog3 Adds VAG MQB49 5C 5D Key Programming

Labels:

Comments

Post a Comment

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Do...
Post a Comment
Read more

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearb...
Post a Comment
Read more

Launch X431 V+ or PIWIS-III for Porsche Diagnosis?

I have the Launch X431 V+ Pros Mini which I purchased new from obdii365 for $1079. I also have a PIWIS III clone V38.90 that i purchased from another website for $1429. I purchased the Launch X431 V+ with the intent of using it to flash a used control module for my car. When I discovered that the Launch X431 V+ could not do that I purchased a PIWIS III clone with the intention of selling the Launch X431 V+ but I have not got around to selling it yet because it is so much easier to use then the PIWIS III.Here is what I have done so far with each one. Launch X431 V+ : Cleared all the fault codes stored in the car. Activated the Aux setting in PCM (PCM/CDR) I had to add an aux cable to the PCM to make use of this one. Changed the number of flashes for one touch turn signal from 3 to 5 (Front-end Electronics) Activated Comfort entry windows up/down via keyfob (Front-end Electronics) Changed the speed when the doors auto lock, 3 mph to 20 mph (Front-end electronics) Changed the speed when...
Post a Comment
Read more