Skip to main content

Launch CRP919E BT Now Able to Purchase SGW Gateway License

Good news! Launch CRP919X BT/CRP919E BT and 8 inch X431 Pro Elite/Pros Elite etc users now can purchase FCA, VAG, Renault, Benz security gateway license in Mall.

Previously, only 10 inch and more advanced tablets are eligible, but now the 7-inch CRP919E/X BT and 8-inch USB can also purchase gateway license.

 

FCA SGW Gateway

For North American (U.S.A, Canada and Mexico) Users: 

Purchase FCA AutoAuth license on autoauth website and register CRP919X/E BT device.

NOTE:

Only devices with a North American IP address can register for FCA AUTOAUTH. Moreover, the AUTOAUTH login portal for North American IP devices will soon be discontinued, and it will be necessary to purchase a non-European gateway package ($899 package).

 

For European users: 

Purchase SGW Function license (European region only) $1,151 package in Mall.

License including:

FCA & Maserati gateway license (1 year)
Mercedes Benz gateway license (1 year)
Renault & Dacia (20 connections)
VAG SFD license (1 year)

 

For Non-American and Non-European users:

FCA SGW gateway has a separate purchase portal ($329)

Launch CRP919E BT Now Able to Purchase SGW Gateway License

VAG Gateway Purchase Notification

VAG SFD authorization is now available as a standalone purchase (some Asian countries); it can also be bought as part of a license package in mall.

For European Users:

Purchase “European SGW Function License” in Mall. ($1,151 + tax).

For Non-European Users:

Purchase “European SGW Function License” in Mall. ($899 + tax).

 

 

Renault Gateway:

For European Users:

Purchase “European SGW Function License” in Mall. ($1,151 + tax).

For Non-European Users:

Purchase “European SGW Function License” in Mall. ($899 + tax).

 

Mercedes gateway:

Mercedes-Benz gateways cannot be purchased individually and require the purchase of a package ($1,151 package).

Non-European users cannot activate Mercedes gateway license on their devices.

 

Note:

  • Please check your device for specific gateway purchase options.
  • If your CRP919E BT, CRP919X BT, Pro Elite etc devices do not display the SGW authorization, provide the serial number to LAUNCH technical support for inquiry.
  • The authorization is valid for one year ONLY. Need to renew license after expiration.
  • Unlocking the SGW gateway requires the software to be within its validity period.
  • The new Renault and Mercedes models support the DOIP protocol. Only devices compatible with the DOIP protocol (e.g., devices with SmartLink or DBScar VII+ DOIP cable) can unlock these gateways. If your device does not support the DOIP protocol, please refrain from purchasing Renault or Mercedes gateways.
Labels:

Comments

Post a Comment

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Do...
Post a Comment
Read more

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearb...
Post a Comment
Read more

Launch X431 V+ or PIWIS-III for Porsche Diagnosis?

I have the Launch X431 V+ Pros Mini which I purchased new from obdii365 for $1079. I also have a PIWIS III clone V38.90 that i purchased from another website for $1429. I purchased the Launch X431 V+ with the intent of using it to flash a used control module for my car. When I discovered that the Launch X431 V+ could not do that I purchased a PIWIS III clone with the intention of selling the Launch X431 V+ but I have not got around to selling it yet because it is so much easier to use then the PIWIS III.Here is what I have done so far with each one. Launch X431 V+ : Cleared all the fault codes stored in the car. Activated the Aux setting in PCM (PCM/CDR) I had to add an aux cable to the PCM to make use of this one. Changed the number of flashes for one touch turn signal from 3 to 5 (Front-end Electronics) Activated Comfort entry windows up/down via keyfob (Front-end Electronics) Changed the speed when the doors auto lock, 3 mph to 20 mph (Front-end electronics) Changed the speed when...
Post a Comment
Read more