Skip to main content

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key

Successfully added new key with Launch x431 IMMO plus and key programmer X-prog3 for Skoda Octavia 2015 with MQB system

1. Enter IMMO -> Skoda (need to have updated version to V10.10 or upper), ->  System mode

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key 1

2. Anti Theft Key Matching

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key 2

3.Key learning

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key 3

4. Connection diagram with Launch DBScar 7 OBD and Xprog 3 

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key 4

5. MQB Anti theft System

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key 5

6.  Learn key, if we go to immobilizer status we can se all currently learned keys

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key 6

7. Press start and follow instructions, first immobilizer data is read, then asks for create dealer key and press Yes and then No for to make original key

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key 7

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key 8

8. New key write 

Launch X431 IMMO Plus Add Skoda Octavia 2015 MQB Key 9
9.
 First original key is read, and then blank. If only one new key is added, after successful writing data to new blank key it will ask to add another or something like that and select no. Then when it ask for how many keys to add select number of all keys including existing keys and newly added.
Then asks if is smart key(button start) if it is not select no. Then in about 30 seconds add keys in lock one by one and turn ignition on and off and add annother one until all keys all learned it wil show 1/3 keys learned.

 

www.obdii365.com

Labels:

Comments

Post a Comment

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Download setup driver (J2534 passthru driver) Free download S
Post a Comment
Read more

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearbox clone. Diagzone: Yes Diagzone does not provide usb conne
Post a Comment
Read more

How to Make Porsche Coding Changes with Launch CRP919X CRP919E

 Instructions on Make Porsche Coding Changes using a Launch CRP919X , CRP919E , CRP919X BT , CRP919E BT scanners. Plugin X431 into OBD 2 Port, Turn Key to Accessory Mode and Wait until VIN is Determined then Hit the Back Arrow in the Upper Left Until You Get to the Next Screen Shown Below  Then select Diagnose (Although you may want to update the unit if updates are available) Then Scroll Down and select Porsche Then Select OK Then Select Automatically Search The Unit should determine the type of 718 you have and then Select OK Then Select System Selection Then Select the appropriate System for the Code you want to adjust (Note: This is the system listed in the instructions below such as Front-end Electronics, Rear-End Electronics, Instrument Cluster or Air Conditioning) Then select Code/Brush Hiding Then select Brush Hidden/Modified Then find the Code you want to adjust (These are the Codes in the instructions below) Then Make the Change Then Hit the Write Code Button
Post a Comment
Read more