LAUNCH CRP919E BT vs Autel MP808BT Pro

Autel MaxiPro MP808BT Pro and Launch CRP919E BT OBD2 diagnostic scanner which is better?

Check the table comparison below:

Product	Autel MP808BT Pro	Launch CRP919E BT
Product image
Price	$669	GL version $439, UK/EU version $399
VCI	MaxiVCI	DBScar VII
Android version	Android 11.0	Android 10.0
Screen	1024*600 7” touch screen	7 inch, 1024*600
Processor	Cortex-A9 quad-core processor (1.4 GHz)	2.0GHz 4-core
Storage	4G+64G	4G+64G
Rear Camera	–	8Million Pixels
Battery	3.7V/5000 mAh	6300mAh, 7.6V
Connection	USB, Bluetooth, WiFi, HDMI Type A	USB Bluetooth
Multi-language	21+ Multilingual	11+ Multilingual
Full system diagnostic	Yes	Yes
Bi-directional control	Yes	Yes
AutoVin	Yes, Auto Scan 2.0	Yes
Special Function	30+	31+
Online ECU coding vehicle coverage	BMW/Porsche/VW/Nissan/Infiniti/Hyundai	VW/Ford offline coding: Nissan, Ford, Mazda, Jaguar, Opel, Vauxhall
Brush Hidden	BMW/VW/Audi/Skoda	/
Guide function	VW/Audi/Skoda/Seat/Man LD	VW/Audi/Skoda/Seat
DoIP	–	Yes with DoIP cable
CAN FD	No	Yes
Software Mall	No	Yes, purchase more software
IMMO Software	No	with IMMO Software Add-on
Battery Test	Yes with BT506	with BST-360
Videoscope	Yes with MV108	Yes, with VSP600
TPMS Module	No	Soon compatible with i-TPMS
Key Programmer	No	Yes, with X431 key programmer remote maker
FCA Autoauth	Yes	Yes
Renault gateway	Yes	No
Update	2 years free update. $299 per year later.	2 Years free update, $199 per year later
OBD2 Adapters	Yes	No

In sum:

MP808BT has more language support, it has Autoscan 2.0 and scans faster, it also supports cloud report management function which also means device management/report management.

MP808BT supports FCA SGW and Renault security gateway unlock, CRP919E BT does not support Renault gatway unlock.

CRP919E BT has more add-on features, remote maker, TPMS modules etc.

CRP919EBT support CAN FD and DoIP protocols, MP808BT Pro does not.

So better get both scanners.

Comments

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming. Obdii365 shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for PAD VII ) If you have Smartbox 3.0 (old PAD V and X431 Pro5 ), download J2534 passthru in the previous post . How to Download Launch X431 SmartLink C J2534 passthru driver? Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update). 1. Download PC tool for update (update smartlink c firmware) Visit https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find Download Download Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Do...

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations? Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of Launch X-PROG3 (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series X-431 V , X-431 V+ , X431 Pro5 , X431 ProS , X431 Pro3s+ , X-431 PAD V , X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software. What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software. Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearb...

How to Make Porsche Coding Changes with Launch CRP919X CRP919E

Instructions on Make Porsche Coding Changes using a Launch CRP919X , CRP919E , CRP919X BT , CRP919E BT scanners. Plugin X431 into OBD 2 Port, Turn Key to Accessory Mode and Wait until VIN is Determined then Hit the Back Arrow in the Upper Left Until You Get to the Next Screen Shown Below Then select Diagnose (Although you may want to update the unit if updates are available) Then Scroll Down and select Porsche Then Select OK Then Select Automatically Search The Unit should determine the type of 718 you have and then Select OK Then Select System Selection Then Select the appropriate System for the Code you want to adjust (Note: This is the system listed in the instructions below such as Front-end Electronics, Rear-End Electronics, Instrument Cluster or Air Conditioning) Then select Code/Brush Hiding Then select Brush Hidden/Modified Then find the Code you want to adjust (These are the Codes in the instructions below) Then Make the Change Then Hit the Write Code Button

Original Launch X-431 OBDII Diagnostic Scan Tools

Search This Blog