Skip to main content

Will Diagzone work with Launch X431 Key Programmer?

Question:

Will Prodiag Xdiag or Diagzone work with Launch X431 Key Programmer?

Diagzone work with Launch X431 Key Programmer 1

The key programmer is quite useful because you don’t need to buy extra programmer to read the frequency of the key. It comes with 4 keys.

Here is an experimental one where we tried to see if this programmer can work with this software.

 

Here we use the Prodiag version with DBScar 7 Bluetooth connector, the Diagzone should be also similar. Prodiag and Diagzone they are have small differences.

Diagzone work with Launch X431 Key Programmer 2

Connect the key programmer via USB.

Connect the antenna on the programmer.

Go to IMMO Function. Check Toolbox and you have the Key programmer.

Diagzone work with Launch X431 Key Programmer 3

Diagzone work with Launch X431 Key Programmer 4

You will have it on the Toolbox.

You will connect first time with this antenna will make a update on the program.

You will see it will modify firmware version.

 

You have the possibility to make the update first when you have this programmer you should go on the update.

This is most important. We do have the remote database update. The update is finished.

Diagzone work with Launch X431 Key Programmer 5

Diagzone work with Launch X431 Key Programmer 6

Try to read key frequency.

Diagzone work with Launch X431 Key Programmer 7

Read remote information

Diagzone work with Launch X431 Key Programmer 8

Read another key.

Diagzone work with Launch X431 Key Programmer 9

If you buy the Launch X431 key programmer and keys separately, you will pay more than 100usd.  So we suggest you buy all this set oversall.

We are not so sure if this functionality works with Prodiag or diagZone.  We will suggest to buy and use original Launch x431 tools (IMMO Plus, IMMO Elite, IMMO Pad, IMMO Pro, X431 PAD VII, X431 PAD V).

Labels:

Comments

Post a Comment

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Do...
Post a Comment
Read more

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearb...
Post a Comment
Read more

Launch X431 V+ or PIWIS-III for Porsche Diagnosis?

I have the Launch X431 V+ Pros Mini which I purchased new from obdii365 for $1079. I also have a PIWIS III clone V38.90 that i purchased from another website for $1429. I purchased the Launch X431 V+ with the intent of using it to flash a used control module for my car. When I discovered that the Launch X431 V+ could not do that I purchased a PIWIS III clone with the intention of selling the Launch X431 V+ but I have not got around to selling it yet because it is so much easier to use then the PIWIS III.Here is what I have done so far with each one. Launch X431 V+ : Cleared all the fault codes stored in the car. Activated the Aux setting in PCM (PCM/CDR) I had to add an aux cable to the PCM to make use of this one. Changed the number of flashes for one touch turn signal from 3 to 5 (Front-end Electronics) Activated Comfort entry windows up/down via keyfob (Front-end Electronics) Changed the speed when the doors auto lock, 3 mph to 20 mph (Front-end electronics) Changed the speed when...
Post a Comment
Read more