Skip to main content

Launch X431 Pro5 and Thinktool Pro Which is Better?

What’s the difference between the Launch X431 Pro5 and Thinktool Pro di-directional scanners?

 

We’re about to dissect these tools from every angle to help you make an informed decision.

First of all, check a table comparison below:

ItemLaunch X431 Pro5Thinkcar Thinktool Pro
Image
launch x431 pro5
thinktool pro
Screen10.1 inch 1920×120010-inch
Operating systemAndriod 9.0Andriod 10.0
RAM4GB4GB
ROM64GB64GB
Battery7000mAh/3.8v6000mAh
CameraRear 8.0 MP/ Front 5.0 MP8.0 MP Pixel Rear Camera
VCISmartBox 3.0VCI Bluetooth adapter
ConnectionUSB/BluetoothBluetooth
Multi-languageYes, 24 languages13 English, French, Italian, Portuguese, Spanish, German, Polish, Russian, Turkish, Japanese, Dutch, Hungarian, Traditional Chinese
CAN FD protocolYes
DoIP protocolYes
Full system diagnosticYesYes
Bi-Directional ControlYesYes
ECU codingYesYes
VAG Guided FunctionYesYes
Service Function5040+
ECU ProgrammingYes, built-in BMW and Benz online programming, Smartbox J2534 OEM programmingNo
Topology MappingYesYes
AutoVinYesYes
FCA AutoauthYesYes
Immobilizer CompatibilityYes, X-prog3 and advanced IMMO package–
Truck diagnosticsYes, with truck software and kit–
TPMSYes, with TSGUN/i-TPMSYes, Need Extra ThinkTPMS G1 Tire Relearn Tool
Battery testWith BST-360 battery testerWith Thinkcar battery tester
VideoscopeWith VSP-600 videoscopeWith Thinkcar Videoscope
ADASYes, need ADAS kitYes with ADAS kit
WiFi printYes with wifi printerYes with thinkcar printer
Scopebox–Yes with thinkcar Scopebox
Update2 years free update, 1 Year subscription is $350/year2 years free update
Price$1,199$1,168

 

In sum:

Both tools have advanced bi-directional control capabilities that allow precise diagnostics and component testing making it a go-to choice for professionals.

Launch X431 Pro 5 comes with Smartbox J2534 passthru, it supports built-in BMW and Mercedes online programming and J2534 OEM online programming with online subscription. Thinktool pro only with Bluetooth VCI, it cannot do online programming. (Only Thinktool Pros+ supports online programming, see attchment image)

Pro5 supports CAN FD and DoIP protocols. Thinktool does not. 

Pro5 supports heavy duty add-on module, Thinktool pro does not. 

Both have 2 years free update.

For the price, Launch X431 pro5 is a better buy. 

 

 

FYI: Thinktool Pros+ vs Thinktool Pro vs Thinktool Pros

Thinktool Pros+ vs Thinktool Pro vs Thinktool Pros

Read also:

Labels:

Comments

Post a Comment

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Do...
Post a Comment
Read more

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearb...
Post a Comment
Read more

How to Make Porsche Coding Changes with Launch CRP919X CRP919E

 Instructions on Make Porsche Coding Changes using a Launch CRP919X , CRP919E , CRP919X BT , CRP919E BT scanners. Plugin X431 into OBD 2 Port, Turn Key to Accessory Mode and Wait until VIN is Determined then Hit the Back Arrow in the Upper Left Until You Get to the Next Screen Shown Below  Then select Diagnose (Although you may want to update the unit if updates are available) Then Scroll Down and select Porsche Then Select OK Then Select Automatically Search The Unit should determine the type of 718 you have and then Select OK Then Select System Selection Then Select the appropriate System for the Code you want to adjust (Note: This is the system listed in the instructions below such as Front-end Electronics, Rear-End Electronics, Instrument Cluster or Air Conditioning) Then select Code/Brush Hiding Then select Brush Hidden/Modified Then find the Code you want to adjust (These are the Codes in the instructions below) Then Make the Change Then Hit the Write Code Button
Post a Comment
Read more