Skip to main content

Launch X431 PAD VII vs EuroTab 3

What’s the difference between Launch X431 PAD VII and the Euro Tab III (Eurotab 3)?

Launch X431 PAD VII vs EuroTab 3

ItemLaunch X431 PAD VIILaunch EuroTab III
Screen13.3 inch capacitive screen，1920*108013.3-inch capacitive screen，1920*1080
Operating SystemAndroid 9.0Android 9.0
Processor2.0GHz Octa cores2.0GHz Octa-core
Memory / RAM256GB /8GB256GB /8GB
Battery19000mAh9360 mAh, 7.6V/71.1Wh
CameraFront 8mp, Rear 13mpFront 8MP, Rear 13MP
ConnectionBluetooth,Wifi (5G WiFi)Bluetooth,Wifi 2.4GHz and 5GHz
VCISmart Link C

3-in-1 SmartLink C Device: Work as VCI to obtain vehicle data; Provide dual diagnostic modes; Act as a J2534 programming device.

 

Smart Link C

3-in-1 SmartLink C interface

 

IP65 waterproof & dustproofYesYes
IP limitationGlobal Version without IP BlockingLimited to EU/UK IP
LanguageEnglish, German, Italian, French, Spanish, Portuguese, Chinese, Korean, Turkish, Swedish, Japanese, Polish, Czech, Russian, Dutch, Thai, Finnish, Danish, Romanian, Arabic, Persian, Hebrew, CroatianEnglish, Russian, German and other
ProtocolsCAN/CANFD/DoIP 2534/D-PDU/RP1210CAN/CANFD/DoIP 2534/D-PDU/RP1210
Supported car brands99% brands (up to 200 brands)99% brands (up to 200 brands)
Full-system DiagnosticYesYes
Active TestYesYes
Auto VINYesYes
Scan VIN/licneseYesYes
Remote DeskYesYes
Repair AssistGUIDED PROCEDURES WITH DTC ANALYSIS & FAULT CODE SOLUTIONSGUIDED PROCEDURES WITH DTC ANALYSIS & FAULT CODE SOLUTIONS
Actuation TestYesYes
Topology Module MappingCOLOR CODED ALL SYSTEM STATUS SCREEN
ON SUPPORTED VEHICLES		COLOR CODED ALL SYSTEM STATUS SCREEN
ON SUPPORTED VEHICLES
Secure Gateway AccessAUTHORIZED FCA ACCESS
WITH AUTOAUTH ACCOUNT		AUTHORIZED FCA ACCESS
WITH AUTOAUTH ACCOUNT
Vehicle DiagnosticsPASSENGER / LIGHT DUTY
SOME MEDIUM DUTY/Optional Heavy duty		PASSENGER / LIGHT DUTY
SOME MEDIUM DUTY/Optional Heavy duty
Basic & Special FunctionsAmerican, ASIAN & EUROPEAN
1996 AND NEWER		American, ASIAN & EUROPEAN
1996 AND NEWER
Service Reset Functions33 special functions33 service and reset functions
Component ActivationsBI-DIRECTIONAL CONTROLBI-DIRECTIONAL CONTROL
X-431 Fix/Haynes PRO Repair Database–Yes
Smartlink remote diagnosisYesYes
Online ProgrammingBenzYesYes
BMWYesYes
VAGYesYes
PorscheYesYes
Land roverYesYes
JaguarYesYes
RenaultYesYes
NissanYesYes
SubaruYesYes
InfinitiYesYes
HyundaiYesYes
KiaYesYes
Online

Parameterization

VWYesYes
AudiYesYes
Online CodingMercedes (SCN)YesYes
BMWYesYes
VAGYesYes
PorscheYesYes
RenaultYesYes
Offline ProgrammingFordYesYes
MazdaYesYes
VauxhallYesYes
OpelYesYes
Flash Hidden FunctionBenzYesYes
BMWYesYes
VAGYesYes
PorscheYesYes
JeepYesYes
DodgeYesYes
ChryslerYesYes
ToyotaYesYes
HondaYesYes
Repair DataBenzYesYes
BMWYesYes
VW AudiYesYes
Porsche (11-)YesYes
Online FFS Activation VW/AudiYesYes
Optional Module 
ADASYes, with ADAS kitYes, with ADAS kit
TPMS ProgrammingYes, with TSGUN add-onYes with TSGUN
Expandable heavy-duty truck module (HD Module)Yes, if purchase truck software kitYes with truck software kit
VideoScopeWith optional VSP-600Yes with vsp600
IMMO ProgrammerWith optional X-prog3Yes with X-prog3
Battery TesterWith battery tester bst360Yes with bst-360
Wi-Fi PrinterYesYes
EndoscopeYes,optional S2-2 SensorBoxYes optional S2-2 SensorBox
OscilloscopeYes, optional O2-1 ScopeBox, Oscilloscopeoptional O2-1 ScopeBox, Oscilloscope







In Sum:

The name!
Euro Tab “name” was created for LaunchTech Europe to sell a European specific model and not have to compete against online seller’s advertising the same thing (In this case the PAD VII). The Euro Tab is a European “Specific” model because of the name, the change in colour for the bumper cover and that the Home Screen is black and white only.
ALL OTHER SOFTWARE AND HARDWARE IS EXACTLY THE SAME.
But how it’s sold “could” be different as a local vendor might add extra product/updates to entice buyers. For example, Eurotab supports X-431 FIX haynes pro repair database, PAD 7 online product does not.

 

Eurotab 3 usually comes with 1 year free software update and 1 year professional Launch database (HaynesPro Electronics + Smart).

PAD VII online product does not have HaynesPro (X-431 Fix) database. But it comes with 2 years free update.

 

Labels:

Comments

Post a Comment

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Download setup driver (J2534 passthru driver) Free download S
Post a Comment
Read more

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearbox clone. Diagzone: Yes Diagzone does not provide usb conne
Post a Comment
Read more

How to Make Porsche Coding Changes with Launch CRP919X CRP919E

 Instructions on Make Porsche Coding Changes using a Launch CRP919X , CRP919E , CRP919X BT , CRP919E BT scanners. Plugin X431 into OBD 2 Port, Turn Key to Accessory Mode and Wait until VIN is Determined then Hit the Back Arrow in the Upper Left Until You Get to the Next Screen Shown Below  Then select Diagnose (Although you may want to update the unit if updates are available) Then Scroll Down and select Porsche Then Select OK Then Select Automatically Search The Unit should determine the type of 718 you have and then Select OK Then Select System Selection Then Select the appropriate System for the Code you want to adjust (Note: This is the system listed in the instructions below such as Front-end Electronics, Rear-End Electronics, Instrument Cluster or Air Conditioning) Then select Code/Brush Hiding Then select Brush Hidden/Modified Then find the Code you want to adjust (These are the Codes in the instructions below) Then Make the Change Then Hit the Write Code Button
Post a Comment
Read more