Skip to main content

How to Activate Launch X431 ADAS Software?

Here we will walk you through how to activate ADAS software on your Launch X431 diagnostic scanners (PAD VII, PAD V, Pro5 etc).


Preparation:

Purchase Launch X431 ADAS activation card here

https://www.obdii365.com/wholesale/launch-x431-adas-activation-card.html

LAUNCH ADAS Software Activation Card activates ADAS Static Calibration function for any LAUNCH X-431 Pro and PAD series scan tool enabling your diagnostic tool to perform calibration functions using any LAUNCH ADAS PRO and Mobile equipment.

 

Compatible X-431 devices: Launch X431 PAD VII, X431 PAD V, Pro5, Pro3S+, Pro Elite, Pro3 APEX, X431 Pros V5.0 etc

NOTE*Launch X431 Pros/Pro Mini, X431 V, X 431 V+, X431 Pros V1.0 do not supports ADAS caluibariton function.

Activate Launch X431 ADAS Software 1


Take PAD VII as an example:

Go to ADAS function

Activate Launch X431 ADAS Software 2

For this function it is necessary to use the ADAS calibration device produced by LAUNCH and activate ADAS software.

Activate Launch X431 ADAS Software 3

If you press “Activate”, PAD7 will ask to enter the ADAS activation card password.

Activate Launch X431 ADAS Software 4

ADAS activation card password can be found on the back of the activation card

Activate Launch X431 ADAS Software 5

Input password and press “ACTIVATE”

Activate Launch X431 ADAS Software 6

Activate Launch X431 ADAS Software 7

ADAS calibration software is activated.

To use ADAS calibration function you also need to buy X-431 ADAS mobile or ADAS pro equipments.

Launch X431 ADAS kit


www.obdii365.com

Comments

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Do...

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearb...

How to Make Porsche Coding Changes with Launch CRP919X CRP919E

 Instructions on Make Porsche Coding Changes using a Launch CRP919X , CRP919E , CRP919X BT , CRP919E BT scanners. Plugin X431 into OBD 2 Port, Turn Key to Accessory Mode and Wait until VIN is Determined then Hit the Back Arrow in the Upper Left Until You Get to the Next Screen Shown Below  Then select Diagnose (Although you may want to update the unit if updates are available) Then Scroll Down and select Porsche Then Select OK Then Select Automatically Search The Unit should determine the type of 718 you have and then Select OK Then Select System Selection Then Select the appropriate System for the Code you want to adjust (Note: This is the system listed in the instructions below such as Front-end Electronics, Rear-End Electronics, Instrument Cluster or Air Conditioning) Then select Code/Brush Hiding Then select Brush Hidden/Modified Then find the Code you want to adjust (These are the Codes in the instructions below) Then Make the Change Then Hit the Write Code Button