Skip to main content

Launch X431 Pro Elite vs Launch X431 V 4.0

LAUNCH X431 PRO ELITE is 2023 new released all-in-one automotive car diagnostic scan tool, comes with Full Bi-directional Control, ECU/Online Coding, 32+ Maintenance Services, OE All Systems Diagnostics etc.  What’s the difference between X431 Pro Elite and X431 V4.0 tablet?
 

Table 1: Launch X431 Pro Elite vs Launch X431 V 4.0

ItemLaunch X431 Pro EliteLaunch X431 V V4.0
ImageLaunch X431 Pro EliteLaunch X431 V 4.0
Screen size8’ inch8’ inch
Operating systemAndroid 10

Wired connection

Android 9, DBScar4 VCI

DBScar Bluetooth connection

ROM4GB3GB
RAM64GB32GB (extend to 128GB )
Battery3.7V/6000mAh3.7V/5000mAh
Guided functionYesNo
New ProtocolsCAN FD, DoIPNeed CAN FD adapter, No DoIP
All systemYesYe
Special functions32+37+
Supports FCA AutoAuthYesYes
Read version informationYesYes
Bi-directional controlYesYes
Read & Delete Fault CodeYesYes
Read data streamYesYes
Active TestYesYes
ECU CodingYesYes
VAG Guided FunctionYesYes
Compatible with X431 X-PROG3 immo programmerYesYes
Compatible with TPMS TSGUNYesYes
Compatible with LAUNCH BST360  battery testerYesYes
Compatible with LAUNCH VSP600 VideoscopeYesYes
WiFi printerYesYes
ADAS calibrationYesNo
HD ModuleNoNo
Free update2 years free update2 years free update
Price$579 (GL version)

$519 (EU version)

$749

*Pro Elite global version has no Ip limitation.  EU version is cheaper and it works in all European countries. It has IP limitations, cannot be used outside EU.

The EU Version is special for Europe Customers, it is cheaper than Global version.  The packing list of them are same.

 

In sum:

1.Pro Elite has almost the same function as X431 V 4.0, except less special functions.

2.Pro Elite has built-in CAN FD and DoIP protocols, improve hardware parameter, larger RAM and battery.

3. Pro Elite is compatible with ADAS calibration (with ADAS equipment) while X431 V 4.0 does not.

4. Pro Elite is much cheaper than X431 V 4.0.

 

Table 2: Launch X431 Pro Elite vs Xtool D8

Launch X431 Pro Elite vs Xtool D8

Pro Elite has newer system, larger RAM than Xtool D8.

Update cost is cheaper than D8.

Launch Pro Elite has TPMS solutions with TSGUN, Xtool does not.

Labels:

Comments

Post a Comment

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Do...
Post a Comment
Read more

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearb...
Post a Comment
Read more

How to Make Porsche Coding Changes with Launch CRP919X CRP919E

 Instructions on Make Porsche Coding Changes using a Launch CRP919X , CRP919E , CRP919X BT , CRP919E BT scanners. Plugin X431 into OBD 2 Port, Turn Key to Accessory Mode and Wait until VIN is Determined then Hit the Back Arrow in the Upper Left Until You Get to the Next Screen Shown Below  Then select Diagnose (Although you may want to update the unit if updates are available) Then Scroll Down and select Porsche Then Select OK Then Select Automatically Search The Unit should determine the type of 718 you have and then Select OK Then Select System Selection Then Select the appropriate System for the Code you want to adjust (Note: This is the system listed in the instructions below such as Front-end Electronics, Rear-End Electronics, Instrument Cluster or Air Conditioning) Then select Code/Brush Hiding Then select Brush Hidden/Modified Then find the Code you want to adjust (These are the Codes in the instructions below) Then Make the Change Then Hit the Write Code Button
Post a Comment
Read more