Skip to main content

Launch X431 PAD VII vs Autel Ultra

Here comes the comparison between Launch X431 PAD VII and Autel MaxiSys MSUltra dianostic scanners.

 

First of all, let’s check a table comparison:

ItemAutel MaxiSys Ultra

autel ultra

Launch X431 PAD VII

launch x431 pad vii

Screen12.9 Inch

Touchscreen
2732 x 2048 DPI / TFT-LCD CORELLE GLASS

13.3 inch capacitive screen,1920*1080
Operating SystemAndroid 7.0Android 9.0
Processor2.3GHz + 1.7GHz
OCTA-CORE
2.0GHz Octa cores
Memory / RAM256GB SSD / 4GB RAM256GB /8GB
Battery18,000 mAh71140mWh
Camera16MP Rear / 5MP FrontFront 8mp, Rear 13mp
ConnectionBluetooth,Wifi,USBBluetooth,Wifi,USB
VCIMaxiFlash VCMI 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester. Optional VCI200Smart Link C
Docking StationIncludedNo, but with Real IP65 rated; 180° adjustable kickstand
IP limitationYesGlobal Version without IP Blocking
LanguageEnglish OnlyEnglish, German, Italian, French, Spanish, Portuguese, Chinese, Korean, Turkish, Swedish, Japanese, Polish, Czech, Russian, Dutch, Thai, Finnish, Danish, Romanian, Arabic, Persian, Hebrew, Croatian
ProtocolsD-PDU/SAE J2534/RP1210/DoIP/CAN FDCAN/CANFD/DoIP 2534/D-PDU/RP1210
Supported car brands99% brands110 brands
Automatic DetectionSCANVIN / AUTO-VIN /AUTO-SCANSCANVIN / AUTO-VIN /AUTO-SCAN
Repair AssistGUIDED PROCEDURES WITH DTC ANALYSIS & FAULT CODE SOLUTIONS GUIDED PROCEDURES WITH DTC ANALYSIS & FAULT CODE SOLUTIONS
Topology Module MappingCOLOR CODED ALL SYSTEM STATUS SCREEN
ON SUPPORTED VEHICLES
COLOR CODED ALL SYSTEM STATUS SCREEN
ON SUPPORTED VEHICLES
Secure Gateway AccessAUTHORIZED FCA ACCESS
WITH AUTOAUTH ACCOUNT

AUTHORIZED Renault Gateway ACCESS WITH AUTOAUTH ACCOUNT

(How to access FCA Autoauth for Autel)

(How to unlock Renault gateway for Autel)

AUTHORIZED FCA ACCESS
WITH AUTOAUTH ACCOUNT

(How to access FCA Autoauth for Launch X431)

Vehicle DiagnosticsPASSENGER / LIGHT DUTY
SOME MEDIUM DUTY
PASSENGER / LIGHT DUTY
SOME MEDIUM DUTY/Optional Heavy duty
Basic & Special FunctionsAmerican, ASIAN & EUROPEAN
1996 AND NEWER
American, ASIAN & EUROPEAN
1996 AND NEWER
VAG Guided FunctionYesYes
Service Resets36+ SERVICE FEATURES50+ special functions
Component ActivationsBI-DIRECTIONAL CONTROLBI-DIRECTIONAL CONTROL
Enhanced FunctionsADVANCED CODING + ADAPTATIONSADVANCED CODING + ADAPTATIONS
Online CodingAudi, Porsche, Renault, GM, Ford, Chrysler, Volvo, Land Rover, Jaguar online codingBMW, VW, Audi, Benz online coding, Ford Mazda offline coding
Online programmingBMW Benz GM, Ford, Chrysler, Volvo, Land Rover, Jaguar and J2534 programmingBMW, VW, Audi, Benz, Nissan Renault etc and J2534 programming
TPMS ProgrammingNo, need standalone TPMS series scannersYes, with TSGUN add-on
Heavy duty diagnosticNo, need MS908CV or MS909CV stand alone deviceYes, if purchase truck software kit
VideoScopeMV480With optional VSP-600
OscilloscopeIn VCMI : 4-channel oscilloscope

 

Optional O2-1 ScopeBox
SensorBoxIn VCMIS2-2 SensorBox
IMMO ProgrammerNoWith optional X-prog3
Battery TesterWith optional BT506 battery testerWith battery tester bst360
Wi-Fi PrinterYesYes
Optional ADAS CalibrationYesYes
Repair databaseYes, has repair assit and tips, relative case, TSB (OEM info)Thru “X-431 FIX” function, need purchase license
Remote ExpertRemote ExpertRemote Diagnose
Australian Ford and HoldenNo, need to purchase license from local regionYes
Software Updates1 Year FREE,$999 per year later2 Years FREE, $569/year later

Summary:

1. Software inception and protection
Launch x431 is built the inception on the VCI so if you lose the VCI then you must buy one and shift the account to it. And if you lose that tablet then you just have to buy the tablet and log in your user name and password.

Autel built the software inception on the tablet, so if you lost the tablet then all lost and if you lost the VCI, then easily you might buy the VCI.

2. Update Cost
Autel Update Cost is expensive over Launch which is reasonable in update cost.

 

3. Additional equipment added to the device

Launch allows you to add key programming while autel don’t have this option and you need to buy stand alone device.
If you need Autel device has both scanning and key programming, go for IM608.

Launch X-431 PAD 7 allows you to add TPMS TGGUN that can program the TPMS sensors while Autel don’t have the option to add this device and you need to buy stand-alone
TPMS tool like TS508 or ITS600.
We need to mention here that some models of Autel has the TPMS function built-inside, like MaxiPro MP808TS, Maxicheck MX808TS.
Both Launch and Autel allow you to add videoscope camera and battery tester.

 

4. Key Programming tool
Autel is more advanced and better when it comes to key programming. But need MaxiIM tablet but no MSUltra.

 

5. TPMS sensor programming and re-learn
Autel is better than Launch. But need stand alone TPMS scanner of Autel.

6. Price level:
Autel is more expensive than Launch.

 

7. Reports
Both give the user the scanning report but Autel Ultra have cloud base that gives you the option to download the report easily.

 

8. Heavy duty scanner
Launch heavy duty add-on is better, cheaper and easier to use than MaxiSys CV.
Autel has the option to buy only stand alone device while launch allow to add the heavy duty module.

 

9. Region

Launch is better for European, Korean and Japanese cars, while Autel is better for American cars.

 

10. Others

Online Programming function has not been authorized in Portugal and Spain (Autel Ultra is recommended).

 

No a perfect single device. Decision is up to you.

Comments

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Download setup driver (J2534 passthru driver) Free download S

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearbox clone. Diagzone: Yes Diagzone does not provide usb conne

How to Make Porsche Coding Changes with Launch CRP919X CRP919E

 Instructions on Make Porsche Coding Changes using a Launch CRP919X , CRP919E , CRP919X BT , CRP919E BT scanners. Plugin X431 into OBD 2 Port, Turn Key to Accessory Mode and Wait until VIN is Determined then Hit the Back Arrow in the Upper Left Until You Get to the Next Screen Shown Below  Then select Diagnose (Although you may want to update the unit if updates are available) Then Scroll Down and select Porsche Then Select OK Then Select Automatically Search The Unit should determine the type of 718 you have and then Select OK Then Select System Selection Then Select the appropriate System for the Code you want to adjust (Note: This is the system listed in the instructions below such as Front-end Electronics, Rear-End Electronics, Instrument Cluster or Air Conditioning) Then select Code/Brush Hiding Then select Brush Hidden/Modified Then find the Code you want to adjust (These are the Codes in the instructions below) Then Make the Change Then Hit the Write Code Button