Skip to main content

Launch X431 PAD 5 Iveco Daily Vehicle List

Question: Can the  Launch X431 PAD V read the  Iveco Daily 12v  or do I need something extra ?  

Answer:
Yes. Pad 5 will read Iveco Daily. You need SmartBox 3.0 J2534 which is in the default package. 


Check the X431 PAD5 Daily vehicle coverage.
This program can detect Iveco vehicle electronic control system (from 2001-2018). 
Model
Year
system
subitem
function
subfunction
Daily
2001-2018
Engine
ACC(Adaptive Cruise Control) ARS200
Version information

Daily
2001-2018
Engine
ACC(Adaptive Cruise Control) ARS200
Read DTC, Clear DTC

Daily
2001-2018
Engine
ACC(Adaptive Cruise Control) ARS200
Data Stream

Daily
2001-2018
Engine
VCM STEP 1
Vehicle information

Daily
2001-2018
Engine
VCM STEP 1
Read DTC, Clear DTC

Daily
2001-2018
Engine
VCM STEP 1
Data Stream

Daily
2001-2018
Engine
VCM STEP 1
Action Functions
Body assemblers- Clutch pedal Body assemblers
Programmable speed threshold
Daily
2001-2018
Engine
VCM STEP 1
Special Functions
Immobilizer emergency start procedure
Daily
2001-2018
Engine
Denoxtronic
Version information

Daily
2001-2018
Engine
Denoxtronic
Read DTC, Clear DTC

Daily
2001-2018
Engine
Denoxtronic
Data Stream

Daily
2001-2018
Engine
Denoxtronic
Action Functions
AdBlue Pump Module, Adblue Dosing value, air pressure value, vent value
Daily
2001-2018
Engine
Denoxtronic
Special Functions
Components replacement
Daily
2001-2018
Engine
Denoxtronic 2
Version information

Daily
2001-2018
Engine
Denoxtronic 2
Read DTC, Clear DTC

Daily
2001-2018
Engine
Denoxtronic 2
Data Stream

Daily
2001-2018
Engine
Denoxtronic 2
Action Functions
AdBlue Pump Module, AdBlue Dosing Value
Daily
2001-2018
Engine
Denoxtronic 2
Special Functions
Components replacement
Daily
2001-2018
Engine
EDC MS6.2 Bosch (KWP)
Version information

Daily
2001-2018
Engine
EDC MS6.2 Bosch (KWP)
Read DTC, Clear DTC

Daily
2001-2018
Engine
EDC MS6.2 Bosch (KWP)
Data Stream

Daily
2001-2018
Engine
EDC MS6.2 Bosch (KWP)
Action Functions
Turbocharger actuator, pre-heater resistance, engine brake electrovalve, cold start lamp, diagnostic warning light, engine
revolutions, turbocharger actuator (0%-100%)

launch-x431-pad5-iveco-daily-1

launch-x431-pad5-iveco-daily-2

launch-x431-pad5-iveco-daily-3

launch-x431-pad5-iveco-daily-4

http://www.obdii365.com/wholesale/launch-x431-pad-v-5-diagnostic-scanner.html
Labels:

Comments

Post a Comment

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Do...
Post a Comment
Read more

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearb...
Post a Comment
Read more

Launch X431 V+ or PIWIS-III for Porsche Diagnosis?

I have the Launch X431 V+ Pros Mini which I purchased new from obdii365 for $1079. I also have a PIWIS III clone V38.90 that i purchased from another website for $1429. I purchased the Launch X431 V+ with the intent of using it to flash a used control module for my car. When I discovered that the Launch X431 V+ could not do that I purchased a PIWIS III clone with the intention of selling the Launch X431 V+ but I have not got around to selling it yet because it is so much easier to use then the PIWIS III.Here is what I have done so far with each one. Launch X431 V+ : Cleared all the fault codes stored in the car. Activated the Aux setting in PCM (PCM/CDR) I had to add an aux cable to the PCM to make use of this one. Changed the number of flashes for one touch turn signal from 3 to 5 (Front-end Electronics) Activated Comfort entry windows up/down via keyfob (Front-end Electronics) Changed the speed when the doors auto lock, 3 mph to 20 mph (Front-end electronics) Changed the speed when...
Post a Comment
Read more