Skip to main content

How to Update Launch CResetter Oil Lamp Reset Tool Software

Launch Cresetter is a specialized automotive diagnostic tool for resetting the automotive service lights, which is developed on the 6th generation CReader hardware platform. This product has applied the latest Cortex-M3 32-bit processor, 2.8″ color LCD display, which is smart, portable, and simple to use. After repaired and serviced the vehicle, the maintenance man can use it to clear or reset the warning lights on the instrument cluster to eliminate the unnecessary warning, which can make the car owners driven at ease.
Launch-Cresetter-1
New oil reset tool from Launch, new design!
Launch-Cresetter-2
Launch Cresetter Main function:
Launch-Cresetter-3
a) Oil lamp Reset

Additional function(for special models)         

b)Airbag ECU Reset
c)Brake pads Reset
d)Air filter indicator Reset
e)Spark plugs Reset
f)Maintenance interval set



Launch X431 Cresetter Support Modules:

American: GM, Ford, Chrysler

European: MB, B MW, VW, Audi, LandRover, Volvo, SAAB, Opel, Citroen, Peugeot, Seat, Skoda

Asian: Nissan, Toyota, Mitsubishi, Honda
Launch-Cresetter-4

How to Update Launch Cresetter Oil Lamp Reset Tool?

1.Update Progress
update-Launch-Cresetter-1
2.Install Update tool
Double click execute software
Click Next in the popped box
Choose destination location and click Next
Click Install
Click Finish
update-Launch-Cresetter-2
3.Install Driver
Connect the Cresetter, open Computer Management
Right click the “unknown device” to select “Update Driver Software”
Select “Browse for driver software on your computer” manually
Click Next to install the drivers after installation,device can be known by the computer normally.
update-Launch-Cresetter-3
4.Updating
Login to www.crecorder.com download the latest version of the Cresetter upgrade package and decompress the software to local disk.
Connect the Cresetter to computer through USB cable and run the Cresetter Upgrade Tool.exe, the screen will display interface as following:
update-Launch-Cresetter-4
Select the language, and then click “Start Upgrade” when a message of upgrading succeed pops out, click Exit, unplug USB cable to complete upgrade.

Product Operation:

use-Launch-Cresetter-1
use-Launch-Cresetter-2
use-Launch-Cresetter-3

Labels:

Comments

Post a Comment

Popular posts from this blog

Install Launch X431 SmartLink C J2534 Driver

Launch X431 SmartLink C can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 reprogramming.   Obdii365   shows where to download and how to install the Passthru SAE J2534 driver for LAUNCH X431 Smart Link C passthru adapter (for   PAD VII ) If you have Smartbox 3.0 (old PAD V and   X431 Pro5 ), download J2534 passthru   in the previous post .     How to Download Launch X431 SmartLink C J2534 passthru driver?   Same as smartbox 3.0, you need both installation programs (setup driver and PC tool for update).   1. Download PC tool for update (update smartlink c firmware) Visit   https://en.cnlaunch.com/ Select Products tab->X-431 PAD VII Pull down product information and find   Download Download   Smartlink J2534.zip Install Launch J2534 PC tool Run LAUNCH J2534 program on desktop. Now you can check Smartlink adapter version and update firmware 2. Do...
Post a Comment
Read more

Will Lauch X-PROG3 Work with Diagzone, Xdiag or Prodiag?

Does Launch X431 X-prog3 work with xdiag, diagzone or prodiag activations?  Diagzone compatible xprog3? Is it working with prodiag? Will it work with xdiag? These are frequently asked questions of   Launch X-PROG3   (also called GIII) programmers. X-prog3 is compatible with Multiple X-431 Series   X-431 V ,  X-431 V+ ,   X431 Pro5 ,  X431 ProS ,   X431 Pro3s+ ,  X-431 PAD V ,  X-431 PAD VII , X-DIAG Pro3 diagnostic tablets. This programmer works not only for programming keys, but for working with ECU and gearbox. But when comes to key programming you need to know what you doing there is not too much info in the Diagzone/Prodiag software.   What worked and failed? Here are user reviews. *You are at your risk. We don’t provide technical support to 3rd party software.   Prodiag: Yes It works with prodiag. Prodiag provides usb connection with virtual comport. It works fine to read ECU and gearbox clone. For example, VAG DQ200 gearb...
Post a Comment
Read more

Launch X431 V+ or PIWIS-III for Porsche Diagnosis?

I have the Launch X431 V+ Pros Mini which I purchased new from obdii365 for $1079. I also have a PIWIS III clone V38.90 that i purchased from another website for $1429. I purchased the Launch X431 V+ with the intent of using it to flash a used control module for my car. When I discovered that the Launch X431 V+ could not do that I purchased a PIWIS III clone with the intention of selling the Launch X431 V+ but I have not got around to selling it yet because it is so much easier to use then the PIWIS III.Here is what I have done so far with each one. Launch X431 V+ : Cleared all the fault codes stored in the car. Activated the Aux setting in PCM (PCM/CDR) I had to add an aux cable to the PCM to make use of this one. Changed the number of flashes for one touch turn signal from 3 to 5 (Front-end Electronics) Activated Comfort entry windows up/down via keyfob (Front-end Electronics) Changed the speed when the doors auto lock, 3 mph to 20 mph (Front-end electronics) Changed the speed when...
Post a Comment
Read more