Original Launch X-431 OBDII Diagnostic Scan Tools

  Problem: Launch X43 1 ProS Mini  is connected to Bluetooth and tested the diagnostic functions and all advanced functions of the Xsara Picasso car, such as resetting the oil or other special functions, and received the same error message: “ Disaccording between the software Serial No. and Smartbox Serial No . Please download and upgrade again or contact local dealer”. “disaccording” here should be “mismatch” i thought. I also tested these cars before: Volkswagen Passat cc 2009: failed Volkswagen Passat B6 2007: : failed Peugeot 308 2011: : failed Xsara Picasso 2003: : failed Mitsubishi Outlander 3 2017: : failed Launch Engineer replied: Solution 1: Please find out and delete “cnlaunch” file in file management. The error prompt has gone away, problem was solved! If solution 1 failed, try 100% working solution 2.  Solution 2: First step is a factory reset. Then go to the official website to download the APK for Launch X431 ProS Mini. Do the following to reset X-431 PRO MI...

  Here is an easy and simple tutorial on registering a new spare key to a Nissan Pathfinder year 2012 using   Launch X431 V+   diagnostic scanner. Take out DBscar Bluetooth adapter Connect DBscar adapter with vehicle via OBD socket Power on X431 V+ Select Reset Function->IMMO->Nissan Reading vehicle information Read VIN success Choose Quick Match Test Read vehicle information (Model, year, system) Choose When performing  key registration This procedure erases all registered key IDs. X431 V+  requires an Immobilizer code (PIN) to access. For MY 2012 PIN is 6014, For Nissan below 2010 PIN is 3536 Enter pin code to access Turn ignition on using a mechanical key Follow instructions 1.Remove the inserted mechanical key from ignition knob 2. Insert the unregistered ignition key into ignition key cylinder, Turn ignition switch to ON Position, and wait for 5 seconds or more 3. Check that the security indicator blinks 5 times 4. Turn ignition switch to LOCK positio...

  List the differences among Launch X431 PAD series scanners: X431 Pad III, X431 Pad V and X431 PAD VII. X431 Pad III X431 Pad V X431 PAD VII Image Configuration Display 10.1″/IPS 1920*1200 10.1″/IPS 1920*1200 13.3″/1920*1080 IPS CPU 2.0GHz Octa-core 2.0GHz Octa-core 2.0GHz Octa-core Memory 2GB 4GB 8GB Storage 64GB 64GB 256GB Camera 8MP Rear+2MB front 13MP Rear+8MB front 13MP Rear+8MB front VCI Connector OBScar IV Smartbox 3.0 Smartlink C VCI Connection Bluetooth 2.4GHz & 5GHz dual WiFi 2.4GHz & 5GHz dual WiFi Battery 1500mAh 9360mAh 71.1Wh(=19000mAh) Adjustable Supporting holder Yes Yes Yes IP65 waterproof & dustproof Yes Yes Quick charge technology Yes Yes Charging station Yes Push Pushi design Size (mm) 317*202*53 320*211*46 353*236*71 Features Operating System Android 5.1.1 Android 7.1 Android 9.0 Full system diagnosis Yes Yes Yes OBDII full function Yes Yes Yes Tech-to-tech remote diagnosis Yes Yes Yes Smartlink remote diagnosis Yes Auto Vin Identification Yes Yes ...

  The software for “TESLA” of the LAUNCH X431 PAD series (PAD VII,   PAD V , PAD II, X431 Throttle etc)  has been completed and distribution has started. Click the “Mall” icon on the top screen. You can purchase the “TESLA” software separately in “Mall” by card payment. You can update for one year. It is an optional software because it cost a lot to develop. The most expensive software you can buy at the Mall is $600. Other optional software is available in “Mall”, i.e commercial vehicle software, Motor angle calibration, Gas particulate filter regeneration, engine power balance monitoring, AC system relearn etc   There is a list of compatible models of “TESLA” software: Tesla Model S and Model X 2016-2020 Model S 2014 2015 2016 2017 2018 2019 2020 Model X 2016 2017 2018 2019 2020   Accessible systems BDY THC TPMS PARK2 SDM by BOSH TAS BMS ESP   https://www.obdii365.com/wholesale/brand-launch-x431/

Topic: After replace BCM, Nissan Almera N17 Immobilizer Nats Key Register with Launch X431 (incl.   X431 V ,   X431 V+ , …).   Here we go: Select Local Diagnose -> Asian -> Nissan -> Manual select -> Far East -> Area -> Almera -> N17 -> 11 /2014 -> Heal Report. Select “P1614 Chain of IMMU-Key. Select “NATS (Nissan Anti-theft System)”.   Select “After replacing or installing operation”.   Select “Replace BCM”. This procedure erases all registered key ids, therefore, all of the customer’s keys should be obtained before starting this procedure. Please operate by following the on-screen guide. Input immobilizer code ( 4 digits PIN) for initialization.   Initialization ECU.   Registration key. Follow the step to insert immo key ,security indicator blink 5 times. Repeat step to register all key. Complete registration key. Alright, once all keys are done, they can start engine.   Double check the DTC by entering Select Local Di...