Original Launch X-431 OBDII Diagnostic Scan Tools

The   Launch X431 Pro Elite   is the cheapest way of getting in the LAUNCH platform. With the launch software you are getting more consistent results. These are the top tips and tricks that allow you to make best use of this diagnostic scanner, including how to change time zone, lower volume, show battery percentage, transfer file from tablet to PC etc.   1. Use the Back button You need to be really friends with the back button, especially for these moments when the keyboard is on half of your screen the back button is your life savior. Also from time to time the tablet wants to connect to your launch account and should you not have a WiFi connection hitting the back button will allow you to continue with your scanning. 2. Settings 1).   Lower volume We start to look at settings and they’re not very intuitive.  So drop the big top menu. Drop it the second time and find that little setting Mark. It is useful to adjust the sound level because it is annoyingly...

How to connect   Launch Smartlink C 2.0   heavy duty truck module with the 10-pin jumper cable? The Smartlink C 2.0 truck module is an extension module for   Launch X431 Pro3S+   and   X431 V+   to diagnose heavy duty trucks.   This is the Jumper-10 cable. There is a converter in the package (marked red below). Remove the red connector on the top of the converter. Then connect the converter with Launch smartlink VCI. Then you can connect these wire harness with the 10-pin jumper cable.  

Q:   The   Launch X431 Pro Elite   is said to be compatible with the x-prog3 programmer. Does the launch x431 pro elite need a DBScar VII to run the x-prog 3? How to connect the Pro Elite with X-prog3?     Answer: Yes, Launch X431 Pro Elite will work with   x-prog3   and   IMMO software pack   to perform key programming functions. Pro Elite/ProS Elite is a tablet with USB connection. They don’t have DBScar and will not work with DBscar VII Bluetooth adapter.   How to Connect Launch X431 Pro Elite/ Pros Elite   with X-prog3?   There is a USB to OBD converter in x-prog3 package. Connect one end with tablet and another end with vehicle via OBD (shown image below) Launch Pro Elite/Pros Elite is also compatible with Launch X431 key programmer remote maker. Connect key programmer with tablet via Type C USB port. Image attached: www.obdii365.com