Original Launch X-431 OBDII Diagnostic Scan Tools

  Launch X431 X-PROG3   Immo key programmer supports some BMW F chassis N20/N55/S63/N63 engine ECU ISN code read and write function, used for CAS4+ all keyys lost, CAS4/CAS4+ replacement read and write ISN code, engine replacement read and write ISN code.   Supporting list:  MEVD172Y SWFL-00000D07-059.008.001 SWFL-00000D07-079.005.001 SWFL-00000D07-089.050.001 SWFL-00000D07-089.070.001 SWFL-00000D07-089.080.001 SWFL-00000D07-089.090.001 SWFL-00000D07-089.100.001 SWFL-000007D5-129.005.001 SWFL-000007D5-179.003.001 SWFL-000007D5-179.004.001 SWFL-000007D5-199.003.001 SWFL-000007D5-199.005.001 SWFL-000007D5-199.007.001 SWFL-000007D5-199.008.001 SWFL-000007D5-209.005.001 SWFL-000007D5-209.006.001 SWFL-00000FEF-089.010.001 SWFL-00000FEF-089.090.001 SWFL-00000FEF-099.070.003 SWFL-00000FEF-099.110.002 SWFL-00000FEF-099.130.001 SWFL-00000FEF-099.140.001 SWFL-00000FEF-119.100.001 SWFL-00000FEF-129.070.001 SWFL-00000FEF-129.090.001 SWFL-00000FEF-129.100.001 SWFL-000017D5-069.16...

  LAUNCH X-PROG3   has an important update- VW Audi MQB gearbox replacement.    With this important update, after replacing the control module of the transmission, which is commonly installed in various models of the VW Group, it is now possible to adapt it to the vehicle by using the X-PRO G3 together with X431 tablets ( X431 PAD V ,   PAD VII   etc). (Before the update, only a limited number of control modules were available). Not only new but also used control modules can be adapted. The BOSCH engine control module can also be adapted to the vehicle, both new and used.  According to a LAUNCH study, as of May 2021, no other competing tester manufacturer’s product can do this. Here we take the DQ200-MQB Gearbox as an example, replace its ECU and finish the settings.   Tools Requirement: X-431 Pad V/PAD VII and X-PRO G3   Software Requirement: Audi V28.70 and above, IMMO PROGRAM V10.02 and above.   A Brief Introduction: Th...

  How-to: add a spare smart key to a Toyota Alphard 2015 with Launch X431 comprehensive diagnostic tools,   X431 V ,   X431 V+ , X431 Pro3,   X431 PAD V ,   X431 PAD VII   etc. Operation Steps: 1. Select [Service Function] – [IMMO] Click [OK] and enter IMMO software Select [Toyota]. Confirm VIN Select [Immobilizer/Keys Programming]. This car equipped smart key, so we select [Entry & Start (Smart Key Programming)] Select [Automatic Scan]. Confirm info Select [Key Code Registration] Read the key code registration reminder info carefully and meet the requirement: Ignition on, Engine off, Turn off any cell phone near the driver’s seat, Then click [OK]. It shows the available rooms for new codes; click [OK] to continue. Operate as prompted, “Touch a registered key to the ignition switch, and the side with the car logo faces the ignition switch”, and then keep the key on the ignition switch After waiting for a while, it prompts “touch a key to be registered t...